Mini WDM Fiber Optic Receiver

Products > CATV Fiber Optic Receiver > Mini WDM Fiber Optic Receiver

Mini WDM Fiber Optic Receiver

Model: OR2201
FTTH mini WDM optical receiver,1 output ports, wavelength:1290~1600, frequency:47-1000MHz, imperial F type female port, SC/APC connector, rated output level 82dBuV (input optical power -8dBm), 12V/DC

Product details

FTTH mini WDM optical receiver,1 output ports, wavelength:1290~1600, frequency:47-1000MHz, imperial F type female port, SC/APC connector, rated output level 82dBuV (input optical power -8dBm), 12V/DC

Features
◇ Built-in CWDM, RFTV operating in 1550nm wavelength, reach GEPON ONU through 1310/1490nm wavelength.
◇Extra-low noise (3.5% modulate,-10dBm receive, CNR ≥ 45dB).
◇AGC control, output level keeps stable as 85dBuV @-7~-2dBm receiving
◇ Good linearity index when receiving optical power in the range of -12~+3dBm.
◇ RF output level adjustable.
◇Compact design.
◇Good heat dissipation.
◇ Low power consumption.

Description:

Desktop home optical receiver is specially designed for FTTH application scene. It adopts MMIC amplifying circuit to ensure excellent CTB,CSO and C/N data within -8~0dB input optical power. Mainly used in CATV HFC system, converting the received CATV RF optical signal to electric signal.

Parameter：

No.	Item	Description
Optical part
1	Input optical wave length	1290÷1600nm
2	Output optical wave length	1310±20nm/1490±20nm
3	Isolation	1490nm to 1550nm RX ≥40dB 1310nm to 1550nm RX ≥40dB
4	Insertion loss(between input and output)	≤1.5dB@1310nm&1490nm
5	Receiving responsibility	≥0.9A/W@1550nm
6	Input optical power	≥-8dBm~0dBm@1550nm
7	Optical interface reflection loss	≥45dB
RF part
8	RF bandwidth cover range	47~1000MHz
9	RF output resistance	75Ω
10	Flatness	±1.5dB
11	Output reflection loss	≥13dB(47~1000MHz)
12	Maximum output level	82±2dBuV@-6dBm
13	Nominal output level	75dBuV@-6dBm
14	MER	≥32dB@-6dBm (60 64QAM signal)
15	CNR(Note1)	≥45dB@-6dBm
16	CTB(Note1)	≥65dB@-6dBm
17	CSO(Note1)	≥65dB@-6dBm
18	Input power	+12VDC±3%
19	Power consumption	≤5W
20	O-ALM state indicate LED	Green often bright: Input optical power is within receiving range(-6dBm±0.5dB~0dBm) Red often bright: Input optical power is lower than receiving bottom limit (-8.5dBm±0.5)
21	PWR state indicate LED	Green often bright: the inner power supply circuit of the receiver is normal. Turn off: The inner power supply circuit is abnormal or without external input.
22	Manual gain adjustment range	≤-20dB~0dB
23	Dimension	113×50×22mm

Note1:60 CH (PAL-DK), Pin -6dBm, Nominal output level 75dBuv,3 EDFA with noise figure 5dB, 65Km, Composite OMI 18.9%.