Optical network unit, 4 10/100Base-T RJ45 ports, 2 VoIP ports, 1 RF port (75ohm, F type connector for CATV), 1 PON port for GEPON, SM, single fiber, Web management, RS232 console for debug, external power, AC220V/DC-12V, 207mm*147mm*39mm(length*width*height)
Features:
◇ Plug and play, features auto-detecting,auto-configuration, and auto firmware upgrade, etc.
◇ Integrated OAM remote configuration and maintenance function.
◇ Support rich QinQ VLAN function and IGMP snoopingmulticast feature.
◇ Integrated line testing compliant with GR-909 on POTS.
◇ Support EPON fiber transceiver, CATV Rx and RF output diagnosticmonitoring, EPON fiber transmitter and RF receiver disable remotely, etc
◇ Support 2xLLIDs, one for data service, the other forVoIP service.
◇ Fully compatibility with OLT based onBroadcom/PMC/Cortina chipset.
◇ For small and medium-sized operators, VoIP servicesare customizable.
◇ Full speed non-blocking switching.
◇ 64 full range VLAN ID.
◇ Support QinQ VLAN, 1:1 VLAN, VLAN reusing, VLAN trunk,etc.
◇ Integrated port monitoring, port mirroring, port ratelimiting, port SLA, etc.
◇ Support auto polarity detection of Ethernet ports (AUTOMDIX).
◇ Integrated IEEE802.1p QoS with four level priorityqueues.
◇ Support IPv4 IGMP snooping and IPv6 MLD snooping
Description
YX2800VT is an EPONbroadband terminal device designed for fulfilling FTTx and triple play service demandof cable television operators. This box is basing on the stable and matureGigabit EPON technology, which has high performance/price ratio, and thetechnology of Layer 2 Ethernet switch, CATV and high quality VoIP as well. Itis highly reliable and easy to maintain, with guaranteed QoS for differentservice. And it is fully compliant to technical regulations such as IEEE802.3ahand technical requirement of EPON Equipment (V2.1) from China Telecom.
Parameter
Technical items | Descriptions |
Uplink interface | Single fiber triplexer incorporates a symmetric 1.25Gbps upstream / 1.25Gbps downstream and 45~875MHz CATV analogue signal |
Wavelength | EPON Tx 1310nm, EPON Rx 1490nm, CATV Rx 1550nm |
Fiber connector | SC/APC connector |
Downlink of DATA | 4x 10/100Mbps auto adaptive Ethernet interfaces, Full Duplex / Half Duplex, AUTO-MDIX, RJ45 connectors |
Downlink of POTS | 2 FXS, RJ11 connectors |
Downlink of CATV | SCTE F type |
Indicators | 10x indicators, for status of power supply, PON, LAN, POTS and CATV. |
DC power supply | +12V, external AC-DC power adaptor |
Power switch | 1 |
Power consumption | 13W |
Operating condition | Operating temp: -5 - +55°C, operating humidity:10-90% (non-condensed) |
Storing condition | Storing temp: -30 - +60°C, storing humidity:10-90% (non-condensed) |
Dimension | 207mm*147mm*39mm(length*width*height) |
Net weight | 1Kg |
Applications
◇ Triple-play(GEPON-IP, CATV, VOIP)
◇ FTTx (FTTH, FTTP, FTTB, FTTC)